ORBITER MENU
Use this to set menu shift.
Example: Setting “ORBITER MENU” to “OFF”
Follow the instructions given in the “Reducing
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select ORBITER MENU setting. Use the buttons to turn the ORBITER MENU on or off.
| LONGLIFE | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SOFT FOCUS | : OFF | |
ORBITER MENU | : OFF | |
MENU CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
ORBITER MENU settings
ON: The position of the menu will be shifted by eight dots each time the menu is displayed.
OFF: The menu will be displayed at the same position.
MENU CONTRAST
Use this to reduce the brightness of the menu.
Example: Setting “MENU CONTRAST” to “NORMAL”
Follow the instructions given in the “Reducing
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select MENU CONTRAST setting.
Use the buttons to change the MENU CONTRAST setting.
| LONGLIFE | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SOFT FOCUS | : OFF | |
ORBITER MENU | : ON | |
MENU CONTRAST | : NORMAL | |
SEL. | ADJ. | EXIT RETURN |
Information
MENU CONTRAST settings
NORMAL: Menu brightness is set to normal.
LOW: Menu brightness is set to lower.
Signal Information Menu
Checking the frequencies, polarities of input signals, and resolution
Use this function to check the frequencies and polarities of the signals currently being input from a computer, etc. On “MAIN MENU”, select “SIGNAL INFO.”, then press the MENU/ENTER button.
The “SIGNAL INFORMATION” is displayed.
|
|
| SIGNAL INFORMATION |
| |||
|
| H. FREQUENCY | : | 48 | .4KHz |
| |
|
| V. FREQUENCY | : | 60 | .0Hz |
| |
|
| H. POLARITY | : | NEGATIVE |
| ||
|
| V. POLARITY | : | NEGATIVE |
| ||
|
| MEMORY | : | 24 |
|
| |
|
|
|
| ||||
|
| RESOLUTION | : | 1024×768 |
| ||
|
| SEL. | ADJ. | EXIT RETURN |
| ||
|
| PC: | MEMORY will be displayed. | ||||
|
| ||||||
Others: MODE will be displayed.
28
