LG Electronics LDV-S504, LDV-S503 owner manual Replacing the Hard Disk Drive, Power cable for

8.Attach the hard disk mounting brackets with the screws.

9.Connect the power cable.

Extension	Power cable for
HDD power cable.	power supply.

10.Connect the IDE cable to the IDE connector on the main board. You must connect the IDE cable as shown below.

Primary IDE cable Secondary IDE cable

IDE1 (Primary

HDD connector)

IDE2 (Secondary

HDD connector)

Replacing the Hard Disk Drive

Turn the power of the unit off and detach the power plug from the outlet.

1.Follow steps 1-3 described in “Installing the Hard Disk Drive”.

2.Remove the screws and detach the hard disk mounting brackets from the unit.

3. Remove the connector from the HDD.

11.Assemble the front panel and top case.

12.Fix the screws.

13.After installing the HDD, you must format the HDD using the setup menu (See page 35).

Notes:

•When you add the new HDD, do not change the position or jump setting of the HDD.

It may delete the current data and cause a mal- function.

•You must connect the primary IDE cable to the primary IDE connector on the main board and the secondary IDE cable to the secondary IDE connec- tor on the main board.

4.Remove the screws from the hard disk drive on the left/right side of the hard disk the mounting bracket.

18