LG Electronics LDV-S503 Remote Setup Mode, Camera / Display Setup, Camera Setting, Client

7.Click the search icon.

The smart search data is displayed.

8.Select the channel from the list.

9.You can play the searched data using the play- back control buttons.

Remote Setup Mode

You can set the DVR of a selected site name in the remote setup tab via the network.

Camera / Display Setup

Camera Setting

1.Select a channel for settings.

If you want to block a channel from other users, mark up the convert option. The marked up chan- nels are displayed “Video Loss” on the live win- dows for POWER or NORMAL user.

2.Enter the new channel name.

3.Select input audio channel.

4.Set the PTZ control options.

•Port: Select the connected data port of the RS-422/485 terminal on the rear panel.

•Control ID: Select the PTZ camera ID from 0 to 255. Make the same settings as the PTZ camera.

•Protocol: Select the protocol supported by PTZ camera.

•Baud Rate: Select the communication speed.(1200, 2400,4800,9600,19200 or 38400)

5.Set the motion options.

•Sensitivity: Set the sensitivity level for the created motion detection area. Sensitivity can be set from 0 to 10.

•Alarm Out: Select the number of the ALARM-OUT terminal for the output alarm signal when motion is detected.

•Area: Select the desired motion detection area on the preview window screen using the mouse. Click the one point and drag & drop the end point to select the motion area.

Notes:

•If you want to display the grid, mark up the [Show Grid] option.

•If you want to select the entire area, click the [Set All] button or click the [Clear All] button to cancel the selected area.

CLIENT PROGRAM

53