Konica Minolta bizhub C550 manual Setting up the PPD driver Mac OS

Setting up the PPD driver (Mac OS X)

8

Front Cover: Attaches a front cover page. Select this check box, and then se- lect the print conditions from the upper drop-down list, and the paper tray that contains the loaded paper to be used from the lower drop-down list.

Back Cover: Attaches a back cover page. Select this check box, and then select the print conditions from the upper drop-down list, and the paper tray that contains the loaded paper to be used from the lower drop-down list.

PI Front Cover:Attaches a front cover from the post inserter. Select this check box, and then select the PI tray that contains the loaded paper to be used from the drop-down list.

PI Back Cover: Attaches a back cover from the post inserter. Select this check box, and then select the PI tray that contains the loaded paper to be used from the drop-down list.

Transparency Interleave: Outputs and inserts interleaves when printing over- head projector transparencies. Select this check box, and then select the pa- per tray that contains the loaded paper to be used from the lower drop-down list.

Note

To print on the front cover and back cover, select “Print”. To only add a blank page, select “Blank”.

The PI Front Cover function and the PI Back Cover function are available only when an optional post inserter is installed.

The PI Front Cover function and the PI Back Cover function cannot be specified when the Front Cover function and the Back Cover function are specified.

The “Transparency Interleave” setting can be specified if “Transparency” is selected as the paper type.

C550 8-28