Setting up the PostScript driver (Windows)
6
To print, load A3 size paper in the tray (“Tray 1” or “Bypass Tray”) of this machine that was specified from the printer driver, and then specify the settings described below from [Basic (Paper)] – [Change Tray Settings] – [Wide Paper] in the control panel.
“A4W”.
Enter the A3 paper size (420.0 × 297.0) in [Change Size].
Specifying a custom size
When printing on paper of a custom size, you can specify the paper size val- ues by following the procedure described below.
1 From the “Original Size” or the “Paper Size”
The Custom Size Settings dialog box appears.
2 Specify settings for the following:
–Width: Specifies the width of the custom paper size according to the selected measurement unit.
–Length: Specifies the length of the custom paper size according to the selected measurement unit.
–Unit: Selects the measurement unit that specifies the size.
3 Click the [OK] button.
Selecting the paper tray
You can specify the paper you want to use for printing by selecting the paper tray that contains the loaded paper.
1
2
Click the Basic tab.
From the “Paper Tray”
C550 |
