Konica Minolta bizhub C550 manual Setting up the system, To set up the printing system

Overview

1

1.3Setting up the system

In order to use this printing system, it must first be set up.

Setup consists of connecting this machine to a computer and installing the printer driver onto the computer being used.

To set up the printing system

Setup of the printing system as described below.

1 Connect this machine to a computer. (Refer to “Compatible interfaces” on page 1-6.)

2 When using a network connection, set up the network. (Refer to “Set- ting up network printing” on page 3-1.)

3 Install the printer driver. (Refer to “Installing the printer driver” on page 2-1.)

4 Check the setup by printing a test page. (Refer to “Test printing” on page 4-2.)

5 Install the screen fonts.

–The CD-ROM contain the Latin TrueType fonts as screen fonts.

–Install the screen fonts after adding the operating system standard fonts.

–For details, refer to Help of the operating system.

–The CD-ROM “ScreenFont” or “Screen Fonts” folder contains the screen fonts.

–The Macintosh fonts are compressed. Install the fonts after decom- pressing them.

Installation of the printer driver may differ depending on the connection method used with this machine in addition to the operating system of the computer and the type of printer driver being used.

!

Detail

For details on connecting this machine to a computer, refer to “Compat- ible interfaces” on page 1-6.

C550 1-8