4 In the “NDPS Printer Name” box, enter the printer name.
5 In the “Printer Agent Source” column, select “Create a New Printer Agent”, and then click the [Create] button.
6 Check the printer agent name, and then in the “NDPS Manager Name” box, browse through the NDPS manager names, and register one.
7 In “Gateway Types”, select “Novell Printer Gateway”, and then register it.
8 In the Configure Novell PDS for Printer Agent window, select “(None)” for the printer type and “Novell Port Handler” for the port handler type, and then register the settings.
Start up NWadmin.
Log on to NetWare as an administrator from a client computer.
1
2
3 Right-click the organization or organizational unit container where you will create the printer agent, and then click “NDPS Printer” on the “Cre- ate” sub-menu.
Note
Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been created and loaded.
Also, before performing the following procedure, check that the TCP/IP protocol has been set in the NetWare server, and check that the IP ad- dress has been set for this machine and that this machine is on.
Setting up network printing
3
11 Use the NetWare server console to load MONITOR.NLM.
12 Select the connection information and, in the active connection col- umn, check that the created PServer is connected.
2
Reminder
When turning the power off, then on again, wait at least 10 seconds be- fore turning the power on again; otherwise, this machine may not function properly.
For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
2
