Setting up network printing
3
2 Touch [Network Settings], then [Bonjour Setting].
3 Specify settings for the following. After specifying the settings, touch [OK].
–Bonjour Setting: Select [ON].
–Bonjour Name: Specify the Bonjour name that is to appear as the connected device name (up to 63 characters).
4 To apply the settings, restart this machine (turn the main power off, then on again).
2
Reminder
When turning the power off, then on again, wait at least 10 seconds be- fore turning the power on again; otherwise, this machine may not function properly.
Setting the Macintosh computer
Use the Macintosh computer that is connected to specify the TCP/IP and AppleTalk settings.
2
Note
For network settings, consult the network administrator.
For the printer driver installation procedure, refer to “Installing the printer driver” on page
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not re- quired to change the settings.
Bonjour/Rendezvous is a Mac OS X function. For Mac OS 9.2, connect using AppleTalk.
C550 |
