Kuppersbusch USA EMWK1050.1E-UL Basic controls, Setting the clock, Safety blocking

USA

Basic controls

Setting the clock

After your microwave oven is first plugged in or after a power failure, the clock display will flash to indicate that the time shown is not correct. To set the clock, proceed as follows:

1.Press the Clock key. The hour numbers will start to flash.

2.Press key “-” and “+” to set the hours.

3.Press again the Clock key to set the minutes. The minute numbers will start to flash.

4.Press key “-” and “+” to set the minutes.

5.To finish, press the Clock key again.

Hiding/Displaying the Clock

If the clock display disturbs you, you can hide it by pressing the Clock key for 3 seconds. The dots that separate the hours and minutes will flash but the rest of the clock display will be hidden.

If you want to see the clock display again, press the Clock key again for 3 seconds.

Safety blocking

The oven functioning can be blocked (for example, to stop it being used by children).

1.To block the oven, press the Stop key for 3 seconds. You will hear a sound signal and the display will show the word “SAFE”. The

oven is blocked in this state and cannot be used.

2.To unblock the oven, press the Stop key again for 3 seconds. You will hear a sound signal and the display will show the time again.

12