Setting up the PPD driver (Mac OS X)
8
8.2Page Setup
Page Attributes (basic settings)
1
2
3
Select “Page Setup” or “Paper Setup” from the [File] menu.
Select “Page Attributes”.
Specify settings for the following:
–Paper Size: Specifies the paper size.
–Orientation: Specifies the orientation.
–Scale: Specifies the enlargement and reduction ratio.
Note
“12 × 18” paper size is one size larger than A3 paper size at 504.8 × 457.2 mm.
To print on paper sizes other than the standard sizes, be sure to set the custom paper sizes in Custom Page Sizes first.
When “W” is selected for each standard paper size from the printer driv- er, the data can be centered and printed.
For example, if A4 size data is created and you want to center and print on A3 size paper, select “A4W” as the paper size and “Tray 1” or “Bypass Tray” as the paper tray from the printer driver.
To print, load A3 size paper in the tray (“Tray 1” or “Bypass Tray”) of this machine that is specified from the printer driver, and then specify the set- tings described below from [Basic (Paper)] – [Change Tray Settings] –
C550 |
