Setting up the PostScript driver (Windows)
6
3
4
Select “Recipient User”, and then enter the user name and password.
Click the [OK] button.
Note
If this machine has been set to permit public users, the machine can be used without a user name and password.
If performing user authentication on a server, the server settings must be specified. Click the [Server Setting] button to select the server.
Click the [Verify] button to communicate with this machine and to check whether authentication can be performed with the user that was entered. You cannot use this function if you are not connected to or able to com- municate with this machine.
If printing is not allowed, printing cannot be performed even when used by a registered user. For details on the user authentication function, con- sult the administrator of this machine.
If performing user authentication with an optional authentication unit, en- ter the user name and password in step 3. For details, refer to the oper- ation manual of the authentication unit.
C550 |
