Monitoring the Unit

Self-Test Results

The results of the last power-up or reset self-test appear in the middle column of the System and Test Status screen.

Table 4-2. Self-Test Results Messages

Message

What Message Indicates

What To Do

 

 

 

 

CPU Failed

The CPU failed internal testing.

1.

Reset the unit and try again.

 

 

 

Call your service

Device

One or more of the Unit's integrated

2.

 

representative for assistance.

Failed

circuit chips failed device-level

 

 

 

 

testing.

 

 

 

 

 

 

DSX-1

The Unit failed to loop data on the

1.

Reset the unit and try again.

Failed, Pt 1

DSX-1 interface on Port 1.

2.

Call your service

 

 

Memory

The 7984 Standalone Termination

 

representative for assistance.

 

 

Failed

Unit failed memory verification.

 

 

 

 

 

 

FPGA

A failure in the FPGA was detected.

1.

Reset the unit and try again.

Failed, Pt1

 

2.

Call your service

 

 

 

 

 

representative for assistance.

 

 

 

 

DataPath

The unit failed to loop data between

1.

Reset the unit and try again.

Failed, Pt1

the DSX-1 Port and the DSL loop.

2.

Call your service

 

 

 

 

 

representative for assistance.

 

 

 

Failure

An internal failure occurred.

Record the failure code and

xxxxxxxx

(xxxxxxxx represents an 8-digit

contact your service

 

hexadecimal failure code for use by

representative.

 

service personnel.)

 

 

 

 

 

 

Passed

No errors were detected.

 

 

 

 

 

 

7984-A2-GB20-10

February 1999

4-5

Page 47
Image 47
Paradyne HOTWIREt 7984 manual Self-Test Results, Call your service