Paradyne HOTWIREt 7984 manual Table A-2. DSX-1 Interface Options 1, Port Status

Configuration Option Tables

DSX-1 Interface Options

For DSX-1 Interface Options, refer to Table A-2. To access the DSX-1 Interface Options screen, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration From →

main/config/DSX±1	Hotwire
Slot 4	Model: 7984
Port 3
DSX±1 INTERFACE OPTIONS
Port Status:	Enable
Line Framing:	ESF
Line Coding:	B8BS
Line Equalization:	0 -133
Excessive Error Rate Threshold:	1E-4
Send (AIS) on Network Failure:	Enable
Send All Ones on DSX-1 Failure:	Enable
Primary Clock Source:	DSX-1

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit Save

Table A-2. DSX-1 Interface Options (1 of 2)

Port Status

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether the port can be configured and used.

Enable ± The port can be configured and used.

Disable ± The port cannot be configured or used. Configuration fields for the port are inaccessible, no alarms or traps associated with the port are generated, and the LED associated with the port is OFF.

Line Framing (LTU Only)

Possible Settings: ESF, D4

Default Setting: ESF

Specifies the framing format to be used by the DSX interface.

HLine Framing is only available when the standalone unit is configured as an LTU. The NTU is automatically configured to match the framing format used by the LTU.

ESF ± ESF framing formatting is used for transmitted and received data over the DSX-1 Interface.

D4 ± D4 framing format is used for transmitted and received data over the DSX-1

Interface.

A-4 February 1999 7984-A2-GB20-10