Paradyne HOTWIREt 7984 manual Saving Configuration Options, Save Configuration

Initial Startup and Configuration

Saving Configuration Options

When changes are made to the configuration options through the Configuration Edit/Display branch, the changes must be saved to take effect. Use the Save key or Save Configuration screen.

"Procedure

To save configuration options changes:

1.Press Ctrl-a to switch to the screen function key area below the dotted line.

2.Select Save and press Enter.

NOTE:

When Exit is selected before Save, or Save has been selected from any menu in the Configuration/Edit branch, a Save Configuration screen appears requiring a Yes or No response

main/config/saveprompt	Hotwire
	Model: 7984

SAVE CONFIGURATION

Save Changes? No

WARNING:

An answer of ªyesº will cause the system

to reset as if it had been powered off and on!

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Command Complete

If the Telnet Session configuration option is changed, a message displays on the Save Configuration screen warning that an answer of Yes will cause the Telnet session to disconnect. Do not answer Yes unless you are prepared to disconnect.

If the DSL Mode configuration option is changed, a message displays on the Save Configuration screen warning that an answer of Yes will cause the system to reset. Do not answer Yes unless you are prepared to reset.

If you select . . .

Then . . .

Yes

No

The configuration is saved.

The Main Menu appears and changes are not saved.

7984-A2-GB20-10 February 1999 3-15