Paradyne HOTWIREt 7984 Network Interface Options Menu, Table A-1. Network Interface Options 1

Configuration Option Tables

Network Interface Options Menu

For Network Interface Options, refer to Table A-1. To access the Network

Interface Options screen, follow this menu selection sequence:

Main Menu → Configuration → Current Configuration →

main/config/network				Hotwire
			Model: 7984
	NETWORK INTERFACE OPTIONS
Margin Threshold:		±3db
Excessive Error Rate Threshold: 1E±6
AutoRate:		Disable
DSL Line Rate:		1552	Kbps
Peer IP Address:		111.255.255.000 Clear
Circuit Identifier:				Clear

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit Save

Table A-1. Network Interface Options (1 of 2)

Margin Threshold

Possible Settings: ±5db, ±4db, ±3db, ±2db, ±1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db, 7db, 8db, 9db, 10db

Default Setting: 0db

Determines the level, expressed in decibels, at which a signal-to-noise margin alarm condition is reported.

±5db to 10db ± Sets the margin threshold to this value.

Excessive Error Rate Threshold

Possible Settings: 1E±4, 1E±5, 1E±6, 1E±7, 1E±8, 1E±9

Default Setting: 1E±6

Determines the error rate at which an excessive error rate (EER) condition is recognized. The rate is the ratio of the number of CRC errors to the number of bits received in a certain period.

AutoRate

Possible Settings: Enable, Disable

Default Setting: Disable

Determines whether the unit automatically adjusts to the best line rate for conditions, or is fixed at the rate in the DSL Line Rate field.

HAutoRate is only available when the unit is configured as an LTU.

Enable ± The LTU adjusts to the best line rate.

Disable ± The LTU's line rate is the DSL Line Rate selected.

A-2 February 1999 7984-A2-GB20-10