Paradyne HOTWIREt 7984 manual Deleting a Login, Controlling Snmp Access

Security

Deleting a Login

"Procedure

1.To delete a login record, follow this menu selection sequence: Main Menu → Control → Administer Logins

2.Select PgUp or PgDn and press Enter to page through login pages/records until you find the one to be deleted.

3.Once the correct record is displayed, select Del ete and press Enter.

4.To complete the delete action, select Save and press Enter.

When the deletion is complete, Command Complete appears at the bottom of the screen. The number of login pages/records reflects one less record, and the record following the deleted record appears.

Controlling SNMP Access

There are three methods for limiting SNMP access.

HDisable the SNMP management option. Refer to Table A-8,General SNMP Management Options.

HAssign SNMP community names and access types.

HLimit SNMP access through validation of the IP address of each allowed SNMP manager.

Assigning SNMP Community Names and Access Types

The unit can be managed by an SNMP manager supporting SNMP. The community name must be supplied by an external SNMP manager accessing an object in the MIB.

To define SNMP community names, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration From → Edit →

SNMP → General SNMP Management

Refer to Table A-8,General SNMP Management Options, to:

HEnable SNMP Management.

HAssign the SNMP community names of the SNMP Managers that are allowed to access the units Management Information Base (MIB).

HSpecify Read or Read/Write access for each SNMP community name.

7-4 February 1999 7984-A2-GB20-10