Paradyne HOTWIREt 7984 manual Testing, Accessing the Test Menu, Main Menu →

Testing

5

Accessing the Test Menu

From the Test menu, you can run network tests, data port tests, and a front panel lamp test.

To access the Test menu, follow this menu selection sequence:

Main Menu →

main/test	Hotwire
	Model: 7974

TEST

Network & DSX-1 Tests

Device Tests

Abort Tests

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Select . . .

To . . .

Network and DSX-1 Tests	Start and stop tests on the DSX or network interface.
Device Tests	Start and stop lamp test.
Abort All Tests	To abort all current tests excluding network-initiated
	loopback tests. An aborted test may continue to run for
	a few seconds as the abort command is sent to the
	remote end and processed.

7984-A2-GB20-10 February 1999 5-1