Paradyne HOTWIREt 7984 manual Entering Identity Information, Main Menu → Control → Change

Initial Startup and Configuration

Entering Identity Information

After accessing your unit for the first time, use the Change Identity screen to determine SNMP administrative system information that will be displayed on the Identity screen of the Status branch. To access the Identity screen, follow this menu selection sequence:

Main Menu → Control → Change

main/control/change_identity			Hotwire
			Model: 7984
		IDENTITY
System Name:	lllQJ98-001		Clear
System Location: Bldg. A412, 2nd Floor, Left cabinet			Clear
System Contact:	C. Parker 800-727-2396 pager 888-555-1212		Clear

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

The three System entry fields are alphanumeric and provide 128 characters for each field. The System entries appear on the Identity display as shown above. The SNMP System entry fields are:

HSystem Name: The general SNMP system name.

HSystem Location: The physical location of the SNMP-managed device.

HSystem Contact: Identification information, such as contact name, phone number, or mailing address.

Valid entry values are any printable ASCII character. ASCII printable characters include:

HNumeric 0±9

HUpper- or lowercase A±Z

HSpace

HAll ASCII symbols except the caret (^)

Select Clear to reset a field to a null value.

3-4 February 1999 7984-A2-GB20-10