Initial Startup and Configuration

Download Code

The Download Code screen allows you to download firmware from a TFTP server. To access the Download Code screen, follow this menu selection sequence:

Main Menu → Control → Download Code

main/control/download_code

 

 

 

Hotwire

 

 

 

 

 

Model: 7984

 

DOWNLOAD CODE

 

 

Image File Name:

 

 

 

 

Clear

TFTP Server IP Address:

000.000.000.000

 

Clear

Destination:

DSL

 

 

Start Transfer:

 

Yes

 

 

 

Packets Sent:

0000000

 

 

Packets Received:

0000000

 

 

Bytes Sent:

0000000

 

 

Bytes Received:

0000000

 

 

Transfer Status:

Transfer Pending

 

 

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu

MainMenu Exit

"Procedure

To download firmware:

1.Position the cursor in the Image File Name field. Type the name of the file to be downloaded.

The file name may be a regular path name expression of directory names separated by a forward slash (/) ending with the file name. The total path name length can be up to 128 characters.

2.Position the cursor in the TFTP Server IP Address field. Enter the TFTP server IP address.

3.Position the cursor in the Destination field. Use the spacebar to select a network destination for the TFTP server. Select DSL if the TFTP server destination is the DSL link or COM if the TFTP destination is the COM port.

4.Position the cursor at the Start Transfer field. Use the spacebar to select Yes. Press Enter.

When the data transfer is complete, the Transfer Status field changes to

Completed successfully.

5.Press the Escape key to return to the Control menu. Select Apply Download.

6.On the Apply Download screen, select Yes to reset the card and activate the code.

3-16

February 1999

7984-A2-GB20-10

Page 41 Page 43
Page 42
Image 42
Paradyne HOTWIREt 7984 manual Main Menu → Control → Download Code, Dsl
Page 41 Page 43
Top Page Image Contents