Paradyne HOTWIREt 7984 manual Table A-1. Network Interface Options 2, Circuit Identifier

Configuration Option Tables

Table A-1. Network Interface Options (2 of 2)

DSL Line Rate

Possible Settings: 400, 528, 784, 1040, 1552

Default Setting: 1552

Determines the fixed line rate of the LTU, in kbps.

HDSL Line Rate is only available when the unit is configured as an LTU, and AutoRate is set to Disable.

400 to 1552 ± The fixed DSL Line Rate, in kbps.

Peer IP Address (LTU Only)

Possible Settings: 000.000.000.001 ± 223.255.255.255, Clear

Default Setting: 000.000.000.001

Specifies the peer IP address for the NTU, to provide remote management providing the remote management link on the DSL loop.

HPeer IP Address is only available when the standalone unit is configured as an LTU.

Address Field ± (000.000.000.001 ± 223.255.255.255) ± Enter an address for the peer unit. The range for the first byte is 000 to 223, with the exception of 127. The range for the remaining three bytes is 000 to 255.

Clear ± Clears the IP address field and sets to all zeros.

Circuit Identifier

Possible Settings: [ASCII Text], Clear

Default Setting: [blank]

Uniquely identifies the circuit number of the transmission vendor's DSL line for troubleshooting purposes.

[ASCII Text] ± Enter a maximum of 128 characters. All printable ASCII characters except ^ (caret) are allowed.

Clear ± Clears the field.

7984-A2-GB20-10 February 1999 A-3