LG Electronics LDV-S504 Connecting the USB Device, Network Connection, Connecting CONSOLE, Mouse

Alarm Output

Connect up to 8 separate alarms (LDV-S503: 4 sepa- rate alarms) to the alarm output.

Alarm signal output at an event occurrence.

Rear of the DVR

Note:

The internal switching relays are rated for 0.5A at 125V AC or 1A at 30V DC. If the electric current is higher than that the unit can be damaged.

Terminal No.	Description
1	Alarm output 1
2	Alarm output 2
3	Alarm output 3
4	Alarm output 4
G	Ground
5	Alarm output 5
6	Alarm output 6
7	Alarm output 7
8	Alarm output 8
G	Ground

Connecting the USB Device

USB Memory Device

Insert the memory device into the USB port. The sys- tem automatically recognizes the device.

Using a USB memory device the system S/W can be easily upgraded.

USB Backup Device

Connect the USB cable of the USB backup device to the USB port on the rear panel of the unit.

(Example: CD/DVD-R/RW drive, HDD, and other external storage.)

Mouse

Connect the USB mouse for function control of the unit.

Network Connection

LAN Connection

Connect the LAN port to an available 10/100 base-T port with a straight ethernet cable (not supplied). The LAN indicator on the front panel will be lit.

Automatic Network Configuration

The DVR can automatically obtain and configure the network interface via DHCP. (see page 32)

Manually Configure Network

The DVR may be manually configured by assigning an IP address, subnet mask, gateway DNS. (see page 32)

Connecting the RS-232C Port

The RS-232C is used for communication with a con- nected PC. This terminal is compliant with the RS- 232C standard.

Connecting CONSOLE

Used to connect to a host device equipped with an RS-232C connector (such as a personal computer). This unit can be controlled from other devices via this connector.

14