Seiko Group IP-6600 manual Paper setting mode Paper SET Mode

(11) Paper setting mode (PAPER SET MODE)

Detects the edge of the paper when replacing or setting the paper, and selects whether the paper should be returned to the waiting position.

When the winder is effective, the paper will not be returned to the waiting position regardless of this setting.

#PAPER SET MODE

>01 : NORMAL

<Parameter (Enter a choice)>

-NORMAL :Detects the paper width when replacing or setting the paper, and then completes the paper setting after checking paper skew during paper feeding.

-SAVING: Detects the paper width at replacing or setting the paper and then completes the paper setting after detecting the edge of the paper during paper rewinding.

NOTE

Usually set "NORMAL" when selecting "SAVING," take care of the followings.

-Cut the edge of the paper so that the edge of the paper is parallel to the guide line and set it to the printer.

If the edge of the paper is not parallel, the print is missed on the edge of the paper and the platen is stained by ink and the paper jam is caused.

-Set the paper after checking no wrinkle on the edge of the paper.

If using the paper with a wrinkle, it causes paper jam.

-Set the paper after checking no tape or glue or the edge of the paper. If using the paper with tape or glue, it causes paper jam.

3-22