Seiko Group IP-6600 manual Capping Unit Cleaning

Inspection & Maintenance

1 Daily inspection and maintenance

NOTE

Perform the followings every day before print.

<Capping Unit Cleaning>

Enter to the SERVICE menu and select “CAP CLEANING” on the operation panel.

#CAP CLEANING

>

The head carriage will move to the center of the printer (platen) and you can access easily to the capping unit.

Open the rear cover and cap cover. Wipe up the edge and periphery of the upper surface of all (six) caps carefully with the cotton swab.

Use Capping fluid and gloves

the

Clean he edge and periphery of the upper surface of the

cap.

Section 2 Basic Operations

Close the cap cover and rear cover. The head carriage will return to the capping unit position (home position) automatically.

NOTE

-Do not leave the printer for long time in the condition that the head carriage is not on the capping unit.

Note: When the swab moves smoothly over the surface the cabs are clean

2-49