Seiko Group IP-6600 manual Using the Origin Point Setting Function

Using the Origin Point Setting Function

<Origin Point Setting>

When printing a small size image such as a A4 size image on the 64-inch width paper, the large blank will be generated as the figure shows below.

In this case, rewind the print paper and set the print origin point to print an image on the blank area.

The print origin point setting at paper rewinding is called as “Origin Point Setting Function.”

(1st time printing) (Paper rewinding) (2nd time printing)

Blank area

Origin point

Base point

<How to Use the Origin Point Setting Function>

1 Lift the pressure roller up/down lever and rewind the paper.

SET PAPER

PUSH DOWN LEVER

Pressure roller up/down lever

NOTE

-Rewind the paper after the paper is enoughly dried. If not, the 1st time printing image may be damaged.

2-32