Seiko Group IP-6600 manual Basic Operations, Winding unit switch setting

Installing Paper on Winder

•Winding unit switch setting

Either internal winding or external winding can be selected. When the winding unit is not used, turn the winding unit switch off.

Inner winding

Outer winding

Winding unit OFF

NOTE

-Slacken the paper so that it passes inside the winding sensor.

-If the winding unit is not used, turn the winding unit switch off.

-When the paper roll for the winding unit nears the diameter of the winding unit’s flange, remove the winding side paper roll and replace the paper tube with a new one.

If not so, a winding error may occur.

Section 2 Basic Operations

In case that the paper roll for the winding

unit exceeds the diameter of the winding

unit’s flange.

-When printing without using a winding unit, edge of paper or printing surface may be damaged or be folded due to contact with the winding sensor caused by winds.

2-39