Seiko Group IP-6600 manual Using the Head Up/Down Lever

Using the Head Up/Down Lever

Alternate the head height according to the media you use. Use the head up/down lever for alternating the head height. (See the figure below)

1 Enter SERVICE menu and execute HEAD HEIGHT ADJ on the operation panel.

#ADJUST HEIGHT	#ADJUST HEIGHT
>	>EXECUTING

2 Open the cap cover and loosen the head fixing screws (2 pieces) with a screw driver.

Cap cover

Head fixing screw

Section 2 Basic Operations

3 Alternate the height of the head with the head up/down

lever.

Up (for thinner media (standard))

Down (for thicker media)

Head up/down lever

Generally, preset the head up/down lever up for glossy vinyle chloride and matted vinyle chloride, and preset the head up/down for banner and FF.

When the paper thickness is 0.5 mm or more, preset the head up/down lever up regardless of media type.

When the head is rubbed with the media due to media floating, preset the head up/down lever down even for the thinner media.

2-43