Casio ISA550WBUN3K9 manual Configuring a Captive Portal, Wireless Setup, User Authentication

Networking	4
Configuring a Captive Portal

Wireless Setup

For a Captive Portal on the wireless network, you must enable the wireless radio and at least one SSID before you can enable a Captive Portal. To configure these settings, use the Wireless > Basic Settings page. .

•Enable the wireless radio.

•Enable the SSID(s) that you want to use for the portal.

•If you created a special VLAN for use with your Captive Portal, assign it to the SSID(s) that you want to use for the portal.

User Authentication

If you want to require user authentication for your portal, the security appliance can authenticate the users by using the local database and an external AAA server (such as RADIUS, AD, and LDAP). The authentication method is derived from the user authentication settings that you specified in the Users > User Authentication page. See Configuring User Authentication Settings, page 393.

For the local database option, you need to set up a User Group with the Captive

Portal service enabled, and add the users’ names and passwords. .

Configuring a Captive Portal

You configure this feature separately for the wireless network (Wireless > Captive Portal ) and for the wired network (Networking > Captive Portal).

STEP 1 Enable Captive Portal: Click On to enable the Captive Portal feature.

STEP 2 Apply On: Choose the SSID, VLAN, or DMZ interface on which to apply the Captive Portal settings.

STEP 3 Web Authentication Type: Choose one of the following methods for web authentication. The security appliance can authenticate the users by using the local database and external AAA server (such as RADIUS, AD, and LDAP). The authentication method is derived from the user authentication settings that you specified in the Users > User Authentication page.

•Internal: Uses the default HotSpot Login page and requires a login.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 181