Configuration Wizards

2

 

Using the Site-to-Site VPN Wizard to Configure Site-to-Site VPN

 

 

 

 

 

To create a new member, enter the username in the User Name field and the password in the Password field, enter the same password in the Password Confirm field for confirmation, and then click Create.

STEP 20 Click OK to save your settings.

STEP 21 After you are finished, click Next.

Viewing SSL VPN Summary

STEP 22 Use the SSL VPN Summary page to view information for all configured SSL VPN group policies and user groups.

STEP 23 To modify any settings, click Back. If the configuration is correct, click Finish to apply your settings.

After the settings are saved, the security appliance is set as a SSL VPN server. The SSL VPN users that belong to the specified user groups can use the selected group policies to establish the SSL VPN connections. If you check Client Internet Access, the advanced NAT rules will be automatically created to allow SSL VPN clients to access the Internet over SSL VPN tunnels.

Using the Site-to-Site VPN Wizard to Configure Site-to-Site

VPN

Use the Site-to-Site VPN Wizard to configure a site-to-site VPN policy to provide a secure connection between two routers that are physically separated. Refer to the following steps:

Starting the Site-to-Site VPN Wizard, page 67

Configuring VPN Peer Settings, page 67

Configuring IKE Policies, page 68

Configuring Transform Policies, page 69

Configuring Local and Remote Networks, page 70

Viewing Configuration Summary, page 70

Cisco ISA500 Series Integrated Security Appliances Administration Guide

66

Page 66
Image 66
Casio ISA550WBUN3K9 manual Using the Site-to-Site VPN Wizard to Configure Site-to-Site, Viewing SSL VPN Summary