Configuration Wizards

2

 

Using the Remote Access VPN Wizard

 

 

 

 

 

Configuring WAN Settings, page 56

Configuring Operation Mode, page 56

Configuring Access Control Settings, page 57

Configuring DNS and WINS Settings, page 57

Configuring Backup Servers, page 58

Configuring Split Tunneling, page 58

Viewing Group Policy Summary, page 58

Configuring IPsec Remote Access User Groups, page 59

Viewing IPsec Remote Access Summary, page 59

Starting the Remote Access VPN Wizard

STEP 1 Click Configuration Wizards > Remote Access VPN Wizard.

STEP 2 On the Getting Started page, choose IPsec Remote Access from the VPN Tunnel Type drop-down list.

STEP 3 Click Next.

Configuring IPsec Remote Access Group Policy

STEP 4 Use the IPsec Group Policy page to configure the following parameters of the IPsec Remote Access group policy:

Group Name: Enter the name for the group policy.

IKE Authentication Method: Specify the authentication method.

-Pre-shared Key: Uses a simple, password-based key to authenticate. If you choose this option, enter the desired value that remote VPN clients must provide to establish the VPN connections. The pre-shared key must be entered exactly the same here and on remote VPN clients.

-Certificate: Uses the digital certificate from a third party Certificate Authority (CA) to authenticate. If you choose this option, select a CA certificate as the local certificate from the Local Certificate drop-down list and select a CA certificate as the remote certificate from the Peer Certificate drop-down list for authentication. The selected remote certificate on the IPsec VPN server must be set as the local certificate on remote VPN clients.

Cisco ISA500 Series Integrated Security Appliances Administration Guide

55

Page 55
Image 55
Casio ISA550WBUN3K9 manual Starting the Remote Access VPN Wizard, Configuring IPsec Remote Access Group Policy