Casio ISA550WBUN3K9 manual Click Device Management Administration Email Alert

Device Management	10
Administration

•DNS resolution of the Security Services application server name fails because the server is offline.

STEP 1 Click Device Management > Administration > Email Alert.

STEP 2 In the Email Server area, specify the SMTP email server that is used to send the alert emails.

•SMTP Server: Enter the IP address or Internet name of the SMTP server.

•Port: Enter the port for SMTP communication. The valid range of port numbers is 1~65535.

-If you enter port 25 (the default setting), you can choose TLS (Transport Layer Security) or SSL (Secure Sockets Layer) for securing the SMTP communication, or choose None for an unsecured connection.

-If you enter port 465, you can choose either TLS or SSL for securing the SMTP communication.

-If you enter port 587, you can choose either TLS or SSL for securing the SMTP communication.

•Secure Connectivity Method: Choose either TLS or SSL for securing the SMTP communication, or choose None for an unsecured connection. If you choose TLS or SSL, SMTP Authentication will be enabled.

•SMTP Authentication: Click On if the SMTP server requires authentication before accepting the connections. Users must provide the SMTP account credentials for authentication.

•Account: Enter the username of the SMTP email account.

•Password: Enter the password of the SMTP email account.

•From Email Address: Enter the email address to send the alert emails.

•To Email Address: Enter the email address to receive the alert emails. This email address is used to receive all alert emails for all events. If you want to send the alert emails that belong to different events to different email addresses, uncheck All Alerts and then specify the email address for each event individually.

STEP 3 To verify the settings, click the Test Connectivity to Email Server. The results appear in a pop-up window.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 409