Casio ISA550WBUN3K9 manual Vlan Pvid

Status	3
Network Status

Field

VLAN

PVID

WAN

Description

VLANs to which the physical port is mapped.

The Port VLAN ID (PVID) to be used to forward or filter the untagged packets coming into the port. The PVID of a Trunk port is fixed to the DEFAULT VLAN (1).

Name	Name of the WAN port.
WAN Type	Network addressing mode used to connect to the
	Internet for the WAN port.
Connection Time	Time that the WAN port is connected, in seconds.
Connection Status	Shows if the WAN port obtains an IP address
	successfully or not. If yes, the connection status shows
	“Connected.”
WAN State	Shows if the WAN port is active or inactive for routing.
	If the WAN port is active for routing, the WAN state
	shows “Up.” If the WAN port is inactive for routing, the
	WAN state shows “Down.”
	NOTE: The state “Down” means that the network
	detection fails. Even though the WAN state is down due
	to network detection failure, the WAN services (like
	SSL VPN and Remote Administration) can still be
	connected except the IPsec VPN Access service.
MAC Address	MAC address of the WAN port.
IP Address	IP address of the WAN port that is accessible from the
	Internet.
Subnet Mask/Prefix	Subnet mask or IPv6 prefix length for the WAN port.
Length
Gateway	Default gateway for the WAN port.
DNS Server	DNS server for the WAN port.
Physical Port	Physical port that is associated with the WAN port.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 89