Networking

4

 

Before You Begin

 

 

 

 

 

A computer accessing the Captive Portal must have one of these operating systems:

Windows 7

Windows XP

Mac OS

Captive Portal also can be used from a mobile device with one of these operating systems:

iOS (iPhone, iPad)

Android

Before You Begin

Before you configure your portal, you may need to configure VLANs, SSIDs, and users. Read the following information to determine what steps may be needed to achieve your goals.

VLAN Setup

No special VLAN configuration is required for a Captive Portal, but you may want to consider the points below before proceeding. To configure VLANs, use the Networking > VLAN page..

Each SSID is associated with a VLAN. You can use the pre-configured VLANs (DEFAULT, GUEST, and VOICE) or add a custom VLAN.

You may want to associate a VLAN, such as the GUEST VLAN, with a security zone so that you can configure appropriate security policies. For example, you can apply URL filtering policies to the zone to prevent access to certain types of websites.

A Captive Portal must be associated either with a single SSID or with a VLAN. If you want to enable a portal for users of multiple SSIDs, you will need to assign them all to the same VLAN. You can use a pre-configured VLAN or can create a VLAN for this purpose.

Cisco ISA500 Series Integrated Security Appliances Administration Guide

180

Page 180
Image 180
Casio ISA550WBUN3K9 manual Before You Begin, Vlan Setup