Casio ISA550WBUN3K9 manual Event Description, CPU Overload Alert, New Firmware Alert

Device Management	10
Administration

STEP 4 In the Event Alerts area, specify the email alert settings for each event. When the relative events are detected, the alert emails are sent to the specified email address.

The following table provides information about how to enable the email alert feature for each event.

Event	Description
CPU Overload Alert	Sends an alert email if the CPU utilization is higher than the threshold over one
	minute and sends another alert email when the CPU utilization comes back
	down to normal for one minute.
	• CPU Threshold Setting: Enter the value in the range 10% to 100% for
	CPU utilization threshold. The default value is 90%.
	• Send to Email Address: Enter the email address to receive the alert
	emails.
	To enable CPU Overload Alert, you must complete the following tasks:
	• Configure the email server settings used to send the alert emails.
	• Check CPU Overload Alert in the Enable column and specify the CPU
	utilization threshold and the email address used to receive the alert
	emails.
New Firmware Alert	Sends an alert email to the specified email address if a newer firmware is
	detected on Cisco.com.
	• Send to Email Address: Enter the email address to receive the alert
	emails.
	To enable New Firmware Alert, you must complete the following tasks:
	• Configure the email server settings used to send the alert emails.
	• Check New Firmware Alert in the Enable column and specify the email
	address used to receive the alert emails.
	NOTE: Make sure that you have an active WAN connection and a valid
	Cisco.com account to download the latest firmware image from Cisco.com and
	then install it on your security appliance. For complete details, see Upgrading
	your Firmware from Cisco.com, page 436.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 410