Configuration Wizards

2

 

Using the Wireless Wizard (for ISA550W and ISA570W only)

 

 

 

 

 

-802.11b/g/n mixed: Choose this mode to allow 802.11b, 802.11g, and 802.11n clients operating in the 2.4 GHz frequency to connect to the access point.

-802.11n only: Choose this mode if all devices in the wireless network can support 802.11n. Only 802.11n clients operating in the 2.4 GHz frequency can connect to the access point.

Wireless Channel: Choose a channel from a list of channels or choose Auto to let the system determine the optimal channel to use based on the environmental noise levels for the available channels.

STEP 4 After you are finished, click Next.

Configuring Wireless Connectivity Types

STEP 5 Use the Choose SSIDs page to enable and configure the SSIDs that you want to use.

Enable: Check this box to enable the SSID.

Mode: Choose the wireless connectivity type for each enabled SSID.

-Intranet WLAN Access: Allows the wireless users to access the corporate network via the wireless network. By default, the WLAN is mapped to the DEFAULT VLAN.

-Guest WLAN Access: Only allows the wireless users who connect to the guest SSID to access the corporate network via the wireless network. By default, the WLAN is mapped to the GUEST VLAN.

-Captive Portal Access: Only allows the users who have authenticated successfully to access the corporate network via the wireless network. The wireless users will be directed to a specific HotSpot Login page to authenticate, and then will be directed to a specified web portal after login before they can access the Internet.

NOTE: Only one SSID can be set for Captive Portal access at a time.

STEP 6 After you are finished, click Next.

Cisco ISA500 Series Integrated Security Appliances Administration Guide

77

Page 77
Image 77
Casio ISA550WBUN3K9 manual Configuring Wireless Connectivity Types