Casio ISA550WBUN3K9 manual WAN1IP

Networking	4
Configuring Quality of Service

Perform the following configuration tasks to give the voice traffic a higher priority:

•Go to the Networking > Routing > Static Routing page to add a static routing rule as follows:

Destination Address	voice_phone_ip
	NOTE: In this case, you can manually create an
	IP address object called “voice_phone_ip” with
	the IP address 10.1.1.11 by selecting the Create
	a new address option.
IP Address	voice_switch_ip
	NOTE: In this case, you can manually create an
	IP address object called “voice_switch_ip” with
	the IP address 192.168.75.200 by selecting the
	Create a new address option.
Metric	1

•Go to the Firewall > NAT > Advanced NAT page to add an advanced NAT rule as follows to permit the voice and data traffic through the WAN port (WAN1) of the security appliance:

Name	voice_traffic_nat
Enable	On
From	Any
To	WAN1
Original Source	voice_phone_ip
Address
Translated Source	WAN1_IP
Address

•Go to the Networking > QoS > General Settings page to enable WAN QoS on the security appliance.

•Go to the Networking > QoS > WAN QoS > Bandwidth page to specify the upstream bandwidth for the WAN port.

•Configure WAN QoS for the outbound voice traffic. For complete details, see Configure WAN QoS for Voice Traffic from LAN to WAN, page 164.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 163