Tripp Lite 932845 Configuration, Setting Function, Scroll Lock Scroll Lock or Ctrl Ctrl. Since

7.Administration (continued)

7.4Configuration Page

The OSD Configuration page allows users to set up their own, individual, working environments. The NetDirector Console KVM Switch with IP Access stores a separate configuration record for each user profile, and sets up the working configuration according to the username that is used to log in.

The Configuration page settings are explained in the following table:

Setting	Function
	Selects which Hotkey controls the OSD function:
	[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. Since
OSD Hotkey	the Ctrl key combination may conflict with programs
	running on the computers, the default is the Scroll Lock
	combination.
	Selects how the Port ID is displayed: the Port Number
	alone (PORT NUMBER); the Port Name alone (PORT
ID Display	NAME); or the Port Number plus the Port Name (PORT
	NUMBER + PORT NAME). The default is PORT
	NUMBER + PORT NAME.
	Determines how long a Port ID displays on the monitor
ID Duration	after a port change has taken place. You can choose an
	amount from 0 - 255 seconds. The default is 5 seconds.
	0 is Always On.

Setting	Function
	Selects which computers will be accessed under Auto
	Scan Mode (To start Auto Scan Mode, see section
	9.4.2, Toolbar Icons) Choices are: ALL - All the ports
	which have been set Accessible; POWERED ON - Only
	those ports which have been set Accessible and are
Scan Select	Powered On; QUICK VIEW - Only those ports which
	have been set Accessible and have been selected
	as Quick View ports; QUICK VIEW + POWERED ON
	- Only those ports which have been set Accessible
	and have been selected as Quick View ports and are
	Powered On. The default is ALL.
	Determines how long the focus dwells on each port as
Scan Duration	it cycles through the selected ports in Auto Scan Mode.
	Key in a value from 0 - 255 seconds. The default is 10
	seconds; a setting of 0 disables the Scan function.
	If there is no input from the console for the amount of
Screen Blanker	time set with this function, the screen is blanked. Key in
	a value from 1 - 30 minutes. A setting of 0 disables this
	function. The default is 0 (disabled).
	If there is no Operator input for the amount of time set
	with this function, the Operator is automatically logged
Logout Timeout	out. A login is necessary before the KVM switch can be
	accessed again. Enter a value from 0 - 180 minutes.
	The default is 30 minutes. 0 disables the function.
	When set to ON, the beeper sounds whenever the port
Beeper	is switched, when activating the Auto Scan function, or
	when an invalid entry is made on an OSD menu. The
	default is ON.
	Allows a user to change the account password. After
Change	clicking the Change Password button, a dialog box
	appears. Enter the old password. Then, enter a new
Password
	password and confirm it by entering it again. Press OK
	to save changes, or press Cancel to discard changes.

15