10.Java Client (continued)
10.3Java Client Control Panel (continued)
10.3.7 Help
Clicking this button brings up the online help screen for the Java Client.
10.3.8 Exit
Clicking the Exit button terminates the Java Client session.
10.4 Port Operation
Java Client port operation is the same as for the Windows Client. See section 9.4, Port Operation, for details.
10.4.1 Panel Array Mode
This is very similar to the Windows Client Panel Array Mode (see section 9.4.3 for details), except for some differences in the toolbar. The Java Client Panel Array Mode Toolbar is described in the table below:
Icon | Function |
|
|
| Pauses on the panel that has the focus at the time you click |
| the pause button. After you click Pause, the button changes to |
| an arrowhead and its caption changes to Resume. To resume |
| scanning, click the Resume button. |
|
|
| Brings the current panels focus to the first available port that |
| is four ports before the port you were just on. |
|
|
| Brings the current panels focus to the first available port |
| before the port you were just on. |
|
|
| Brings the current panels focus to the first available port after |
| the port you were just on. |
|
|
Icon | Function |
|
|
| Brings the current panels focus to the first available port that |
| is four ports after the port you were just on. |
|
|
| Increase the number of panels in the array. (Choose between |
| 16, 8, 4 and 1.) |
|
|
| Decrease the number of panels in the array. (Choose be- |
| tween 16, 8, 4 and 1.) |
|
|
| Toggle 4/3 aspect ratio. |
|
|
| Exit Panel Array mode. |
|
|
10.4.2 Keyboard Hotkey Operation
Keyboard hotkey operation is the same as for the Windows Client. See section 9.4.5, Keyboard Hotkey Operation, for details.
11.Log File
11.1Log File on Remote Main Page
The NetDirector Console KVM Switch with IP Access logs all the events that take place on it. To view the contents of the log file, click the Log icon at the left of the remote main page; or, click on the Log tab of the local console OSD. A screen similar to the one below appears:
A maximum of 512 events are stored in the log file. To clear the log file, click on the Clear Log icon at the lower right of the screen.
Note: The Log File is a temporary file that is erased when the KVM switch is turned off or loses power. It is recommended that you install the Log Server to back up the contents of the log file.
35
