Q-Logic 6140 manual Set Mgmt Command, Configures the router’s management port 10/100, Set mgmt

A

A – Command Reference Commands

Set Mgmt Command

	Configures the router’s management port (10/100).
Authority	Admin session
Syntax	set mgmt
Examples	The following example shows the set mgmt command:
	QRouter (admin) #> set mgmt
	A list	of attributes with formatting and current values will follow.
	Enter a new value or simply press the ENTER key to accept the current
	value. If you wish to terminate this process before reaching the end
	of the	list press 'q' or 'Q' and the ENTER key to do so.
	WARNING:
	The following command might cause a loss of connections to the MGMT
	port.
	IPv4	Interface (0=Enable, 1=Disable)[Enabled	]
	IPv4	Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp)[Dhcp ]
	IPv6	Interface (0=Enable, 1=Disable)[Enabled	]
	IPv6	Mode (0=Manual, 1=AutoConfigure)[Manual	] 1

All attribute values that have been changed will now be saved.

FI0154601-00 C A-33