A – Command Reference Commands

S

Set iSNS Command

 

Configures iSNS parameters for an iSCSI port.

 

Authority

Admin session

 

 

Syntax

set isns [port_num]

 

 

Keywords

[port_num]

 

 

 

The number of the iSCSI port to be configured for iSNS.

Examples

The following example shows the set isns command:

 

QRouter (admin) #> set isns 1

 

 

 

A list of attributes with formatting and current values will follow.

 

Enter a new value or simply press the ENTER key to accept the current

 

value. If you wish to terminate this process before reaching the end

 

of the list press 'q' or 'Q' and the ENTER key to do so.

 

Configuring iSNS iSCSI Port:

1

 

 

--------------------------------

 

 

iSNS (0=Enable, 1=Disable)

[Disabled

] 0

 

iSNS Address (IPv4 or IPv6)

[0.0.0.0

]

 

fe80::21b:21ff:fe06:d517

 

 

 

TCP Port No.

[3205

]

All attribute values for Port 1 that have been changed will now be saved.

A-32

FI0154601-00 C

Page 164
Image 164
Q-Logic 6140 manual Set iSNS Command, Configures iSNS parameters for an iSCSI port, Set isns portnum