Q-Logic 6140 manual At the ftp prompt, type bin to set binary mode. For example

4 – Installation Firmware Installation

S

3.At the ftp prompt, type bin to set binary mode. For example:

ftp> bin

200 Type set to I.

4.Use the put command to transfer the firmware image file from the workstation to the router. For example:

ftp> put isr-6140-2_0_6_3.bin 200 PORT command successful.

150 Opening BINARY mode data connection for 'isr-6140-2_0_6_3.bin'.

226 Transfer complete.

ftp: 4822816 bytes sent in 0.41Seconds 11878.86Kbytes/sec.

5.Enter quit. The firmware image has been transferred to the router.

6.Log on to the router as an administrator.

7.Enter the following command from the router, where x stands for the firmware image name:

image unpack isr-6140-x_x_x_x.bin

The following message displays:

Unpack Completed. Please reboot the system for FW to take effect.

8.Enter reboot. The following message displays:

Are you sure you want to reboot the System (y/n):

9.Type y to reboot the system.

4-12 FI0154601-00 C