QsrSensorValue, QsrUpperThreshold, QsrLowerThreshold | Q-Logic 6140

D – Simple Network Management Protocol (SNMP) Management Information Base (MIB)

S

qsrSensorValue

Syntax	Integer32
Access	Read only
Description	The current value of the sensor.

qsrUpperThreshold

Syntax	Integer32
Access	Read only
Description	The upper-level threshold for this sensor.

qsrLowerThreshold

Syntax	Integer32
Access	Read only
Description	The lower-level threshold for this
	sensor.

qsrSensorState

Syntax	INTEGER
Access	Read only
Description	The state of this sensor, indicating the
	health of the system.
	Unknown. The sensor value/thresh-
	olds cannot be determined.
	Normal. The sensor value is within
	normal operational limits.
	Warning. The sensor value is
	approaching a threshold.
	Critical. The sensor value has
	crossed a threshold.

D-10	FI0154601-00 C

Image 238

Q-Logic 6140 manual QsrSensorValue, QsrUpperThreshold, QsrLowerThreshold, QsrSensorState

Contents

SANbox 6140 Intelligent Storage Router Document Revision History SANbox 6140 Intelligent Storage Router User’s Guide SANbox 6140 Intelligent Storage Router User’s Guide Page Table of Contents Planning Removal/Replacement FI0154601-00 C Command Reference Configuring Chap Simple Network Management Protocol Snmp FI0154601-00 C List of Tables FI0154601-00 C Intended Audience Related Materials Safety Communications Statements Federal Communications Commission FCC Class a Statement CE Statement Laser Safety Information Vcci Class a Statement Accessible Parts Electrostatic Discharge Sensitivity Esds PrecautionsGeneral Public License Preamble FI0154601-00 C FI0154601-00 C FI0154601-00 C No Warranty END of Terms and Conditions How to Apply These Terms to Your New Programs Ty Coon, President of Vice Availability Technical SupportTraining Contact Information General Description System Fault LED Blink Patterns Input Power LED GreenSystem Fault LED Amber Chassis LEDs Reset a Router Maintenance ButtonChassis Controls Enable Dhcp Reset and Select Boot ImageReset IP Address Restore Factory Defaults Fibre Channel Ports Power OFFPower on Before firmware Initialization Fibre Channel Port LEDs Fibre Channel Transceivers Gigabit Ethernet Port LEDs Ethernet Port-Management Serial Port Serial Port Pin Identification Planning Devices Fibre Channel Device AccessFC Performance ISCSI Bandwidth Related performance characteristics include the followingISCSI Performance Latency T1 / DS-1 1.554 Mbits/Sec Performance TuningT3 / DS-3 45 Mbits/Sec Mbits/Sec OC-1 50 Mbits/Sec OC-3 150 Mbits/Sec Management Multiple RoutersOC-12 and Above 621 Mbits/Sec Recovery Services Security FI0154601-00 C Management Workstation Site RequirementsManagement Workstation Requirements Power Requirements Environmental Conditions Installing the SANbox 6140 Router SANbox 6140 Router and Accessories Pre-installation Checklist Pre-installation Check ListInstall the Transceivers Mount the Router Configure the Management Workstation Connect the Management Workstation to the Router Setting the Workstation IP Address Configuring the Workstation Serial Port Connect the router to the power see Install SANsurfer iSCSI/FC Router ManagerWindows Installation Select the Intelligent Storage Routers icon For Linux, enter the following command Linux InstallationStart SANsurfer iSCSI/FC Router Manager Connect the Router to AC Power Configure the Router Telnet 10.0.0.1 username guest password Cable Devices to the Router Using the CLI to Install Firmware Firmware InstallationUsing SANsurfer iSCSI/FC Router Manager to Install Firmware Enter your username and password. For example At the ftp prompt, type bin to set binary mode. For example Enter reboot. The following message displaysType y to reboot the system Following message displays Chassis Diagnostics This section describes the following conditions Input Power LED is Off Power-On Self-Test DiagnosticsSystem Fault LED is On Heartbeat Blink Pattern System Error Blink PatternLED Blink Patterns OK Operational Over-Temperature Blink Pattern Management Port IP Address Conflict Blink Pattern Recovering a Router FI0154601-00 C Removal/Replacement SFP Transceiver Removal and Replacement Replacement Router Removal and ReplacementRemoval SANsurfer iSCSI/FC Router Manager Introduction Menu Bar SANsurfer Router Manager Main Window Sections File Menu Settings MenuView Menu Wizards Menu 7shows the Wizards drop-down menu Help Menu 8shows the Help drop-down menu Tool Bar Action Menu SANsurfer iSCSI/FC Router Manager Action Menu System Tree Window 11shows the system tree Status Icons and Text 12 Component Information FC and iSCSI Ports RouterDiscovered iSCSI Initiators FC discovered target icons FC Discovered TargetsISCSI Presented Targets LUN icons SANbox 6140 Router Information Basic Information Connectivity Management Information 14 Information Tabbed Page Management Information FI0154601-00 C NTP Server Information 15 Information Tabbed Page NTP Server Information Security Information 16 Information Tabbed Page Security Information Snmp Management Snmp ConfigurationSnmp Management tabbed page provides the following options Snmp Settings Snmp Trap Receivers FC Ports „ Link Status Port status, either Link Up or Link Down Advanced Configuration 19 FC Port Advanced Configuration Tabbed Save FC Port Settings Complete Click OK to close the message box Statistics 20 FC Port Statistics ISCSI Ports ISCSI port display consists of three tabs „ Information ISCSI Port Information ISCSI Port Network Settings„ Actual FI0154601-00 C Enable iSNS 22 Enable iSNS Server with IPv4 Address 24 Advanced Configuration Tabbed Advanced iSCSI Port Parameters FI0154601-00 C Discovered iSCSI Initiators 25 Discovered iSCSI Initiator Tabbed Pages Initiator Information Chap Settings LUN List 26 LUN List Tabbed FC Discovered Targets 27 FC Discovered Targets Information Tabbed 28 LUN List Tabbed ISCSI Presented Target List Tabbed 29 iSCSI Presented Target List Tabbed Discovered LUN Information Tabbed 30shows the Discovered LUN Information tabbed FI0154601-00 C LUN Presentation Information 1 and 2 Tabbed Pages 31shows the LUN Presentation Information 1 tabbed ISCSI Presented Targets 32 iSCSI Presented Targets Tabbed Pages Information Tabbed LUN Presentation Information Tabbed 33 LUN Presentation Information Tabbed Discovered LUN Information 34 Discovered LUN Information Tabbed Wizards 35 Wizards Menu Configuration Wizard 36 iSCSI Port Selection Dialog Box „ IP Address „ Subnet Mask „ Gateway Click Next 38 iSCSI Port IPv6 Settings Panel ISCSI Port IPv6 Settings Panel appears, as shown in Figure 39 Confirm Changes Dialog Box Confirm Changes dialog box displays, as shown in Figure Enter the password, then click OK Wizard displays a Warning message, as shown in Figure 42 iSCSI Port Configuration Status System displays the Finish dialog box, as shown in Figure Read the information, then click Finish Add Initiator Wizard 44 Create an Initiator Dialog Box 45 Security Check Dialog Box Security Check dialog box displays, as shown in Figure FW Update Wizard 47 Router Selection Dialog Box 48 Firmware File Selection Dialog Box 49 Confirm Changes Dialog Box 51 Firmware Update Status Dialog Box-Progress Presentation Wizard 53 Device Selection Dialog Box 54 LUN Mapping Dialog Box LUN Mapping dialog box displays, as shown in Figure 55 Confirm Changes Dialog Box 57 LUN Masking Configuration Status Dialog Box Finish dialog box displays, as shown in Figure 59 Finish Dialog Box Click Finish to complete the Presentation wizard Presentation Unmap Wizard 60 Device Selection Dialog Box 61 Select the Initiator for the LUN Presentation Dialog Box Confirm the LUN mapping changes by clicking Next 63 Security Check Dialog Box Click Finish to close the wizard Command Reference Logging on to a SAN Router Saving and Restoring Router Configurations Working with SAN Router ConfigurationsModifying a Configuration „ LUN Mapping, which uses the following command Save Router Configuration and Persistence Restore Router Configuration and Persistence Command CommandsCLI command syntax is as follows Table A-1. Command Line Completion Syntax Admin CommandAuthority Keywords Beacon Beacon CommandOff Logs Clear CommandClear logs or stats Stats MMDDhhmmCCYY Date CommandSyntax date Keywords MMDDhhmmCCYY Restore save FRU CommandKeywords restore Syntax fru Examples The following example shows the help command Help CommandDisplays a list of the commands and their syntax Authority None Syntax help Luns Lunmask Memory Mgmt Ntp Presentedtargets snmp History Displays a numbered list of the previously entered commandsExamples The following example shows the history command Authority None Syntax history Image Image CommandCleanup Unpack file Add Initiator CommandInitiator Mod Please select an Initiator from the list above q to quit Examples The following example shows the logout command Logout CommandAuthority None Syntax logout Lunmask Command Lunmask Seagate Examples The following example shows the passwd command Password CommandChanges the guest and administrator passwords Syntax passwd Examples The following example shows the ping command Ping CommandSyntax ping Examples The following example shows the quit command Quit CommandAuthority None Syntax quit Restarts the router firmware Authority Admin session Reboot CommandSyntax reboot Examples The following example shows the reboot command Reset Factory Command Save Command Traces Syntax set Set CommandKeywords chap Following example shows the set chap command Set Chap CommandConfigures general router parameters Set chap Set fc portnum Set FC CommandPortnum FI0154601-00 C Number of the iSCSI port to be configured Set iSCSI CommandConfigures an iSCSI port Following example shows the set iscsi command FI0154601-00 C Number of the iSCSI port to be configured for iSNS Set iSNS CommandConfigures iSNS parameters for an iSCSI port Following example shows the set isns command Following example shows the set mgmt command Set Mgmt CommandConfigures the router’s management port 10/100 Set mgmt Following example shows the set ntp command Set NTP CommandConfigures the NTP parameters Set ntp Set snmp Set Snmp CommandSpecifies the setting of the trap destinations Trapdestinations That have been changed Will now be saved Following example shows the set system command Set System CommandConfigures the general router parameters Set system Following example shows the set vlan command Set Vlan CommandConfigures the router’s Vlan parameters Set vlan Initiators fc or iscsi Show CommandAuthority None Syntax show chap Initiatorslunmask Presentedtargets fc or iscsi LuninfoLuns Targets fc or iscsi Examples The following example shows the show fc command Show Chap CommandDisplays Chap configuration for iSCSI nodes Authority None Syntax Show fc portnum Show FC CommandNone Identifies the number of the FC port to display Syntax show initiators fc Show Initiators CommandKeywords fc Specifies the display of Fibre Channel initiators Authority None Show Initiators LUN Mask CommandSyntax show initiatorslunmask Show iscsi portnum Show iSCSI CommandNumber of the iSCSI port to be displayed IPv6 Link Local Following example shows the show isns command Show iSNS CommandShow isns portnum Displays the router event log Show Logs CommandExamples The following example shows the show logs command Show logs Show Luninfo Command Show luninfo Displays LUN information for each target Show LUNs CommandExamples The following example shows the show luns command Show luns Show Lunmask Command Syntax show lunmask Following example shows the show mgmt command Show Mgmt CommandShow mgmt Show NTP Command Show ntp Syntax show presentedtargets fc Show Presented Targets CommandSpecifies the display of FC presented targets 10.3.5.66 Show Snmp Command Show snmp Displays the router statistics FC and iSCSI Show Stats CommandShow stats 60362392962831 55036896842234 IP Fragment Rcvd Out of Order Show System Command Show system Scsi Show Targets CommandShow targets Specifies the display of FC targets Following example shows the show targets iscsi command Syntax show vlan portnum Show Vlan CommandKeywords portnum Target Target CommandFollowing example shows the target add command Not supported Following example shows the targetmap add command TargetMap CommandTargetmap Following example shows the targetmap rm remove command Traceroute Command Syntax traceroute Configuring Chap CLI-Discovery Session-Bi-directional Chap CLI-Discovery Session-Uni-directional Chap Click Advanced Select Chap Login InformationSelect Mutual Authentication Click Discovery CLI-Normal Session-Bi-directional Chap Click OK Click OK. The initiator completes the normal loginUse Set Chap CLI-Normal Session-Uni-directional Chap Click Advanced Configuration Select Enable ChapGUI-Discovery Session-Bi-directional Chap Click Add Enter the address of the iSCSI port of the bridge GUI-Discovery Session-Uni-directional ChapType the IQN name string Click OK Click OK. The initiator completes discovery GUI-Normal Session-Bi-directional Chap Click Advanced Click Chap Login InformationClick Information Select Enable Chap Click Advanced Click OK Click OK. The initiator completes normal login GUI-Normal Session-Uni-directional Chap FI0154601-00 C Application Modules Table C-1. Application Modules-Informational Log Messages ISCSI Driver Table C-2. Scsi Driver-Informational Log Messages Fibre Channel Driver Table C-3. Fibre Channel Driver-Informational Log Messages Error Log Messages Table C-4. Application Module-Error Log Messages Capacity Table C-4. Application Module-Error Log Messages FI0154601-00 C FI0154601-00 C Table C-5. iSCSI. Driver-Error Log Messages Table C-6. Fibre Channel Driver-Error Log Messages Log Messages Log Messages Error Log Messages Table C-7. User Modules-Error Log Messages User Modules Log Message Table C-8. System-Error Log Messages System Fatal Log Messages Table C-9. iSCSI Driver-Fatal Log Messages Table C-9. iSCSI Driver-Fatal Log Messages FC Driver Table C-10. Fibre Channel Driver-Fatal Log Messages Table C-10. Fibre Channel Driver-Fatal Log Messages Table C-11. System-Fatal Log Messages FI0154601-00 C Snmp Properties Table D-1. Snmp Properties Snmp Trap Configuration Table D-2. Snmp Trap Configuration Parameters QsrHwVersion System InformationQsrSerialNumber QsrSwVersion Network Port Table QsrNwPortEntry QsrNwPortAddressMode QsrNwPortRoleQsrNwPortIndex QsrIPAddressType Fibre Channel Port Table QsrFcPortIndex QsrFcPortEntryQsrFcPortRole QsrFcPortNodeWwn Sensor Table QsrSensorType QsrSensorEntrySensor entry consists of the following sequence of objects QsrSensorIndex QsrLowerThreshold QsrSensorValueQsrUpperThreshold QsrSensorState QsrEventDescription Notification ObjectsQsrEventSeverity QsrEventTimeStamp Network Port Down Notification Agent Start Up NotificationAgent Shut Down Notification Fibre Channel Port Down Notification Sensor Notification Generic Notification FI0154601-00 C AC power CE statement Account, guest A-2 Index Index-2 FI0154601-00 C FI0154601-00 C Index-3 LUN FI0154601-00 C Index-5 Index-6 FI0154601-00 C TCP Index-8 FI0154601-00 C