A

7 – SANsurfer iSCSI/FC Router Manager System Tree Window

„If you selected the Use the following IP address radio button, you can configure the IP address.

„Subnet Mask – Displays the management port’s subnet mask.

„If you selected the Obtain an IP address automatically (DHCP), the system obtains the subnet mask automatically through DHCP.

„If you selected the Use the following IP address radio button, you can configure the subnet mask.

„Gateway – Displays the IP address of the server acting as a gateway to your Internet connection.

„If you selected the Obtain an IP address automatically (DHCP), the system obtains the gateway address automatically through DHCP.

„If you selected the Use the following IP address radio button, you can specify the gateway address.

„IPv6 Management Info – Select this check box to use IPv6 (Internet Protocol version 6, 128-bit addressing), then use the radio buttons to identify whether to use either a dynamic or static IP address.

„IPv6 Address1 – The first user-assigned IPv6 address to which the port responds. A value of :: indicates that an IPv6 address has not been assigned. Although you may modify the IP address in this window, you will typically set it using the Configuration Wizard.

„IPv6 Address2 – The second user-assigned IPv6 address to which the port responds. A value of :: indicates that an IPv6 address has not been assigned. Although you may modify the IP address in this window, you will typically set it using the Configuration Wizard.

„IPv6 Default Router – Use this address to set the default router for the IPv6. The system can also set the IPv6 default router dynamically depending on your network configuration.

„IPv6 Local Link – This field contains the IPv6 link local address of the port. It is not editable.

NOTE:

IPv6 support is available only with hardware version 6 and greater and software version 2.4.0.0 and greater.

„Set IP Address – After making any IP address changes, click this button to save your changes.

FI0154601-00 C

7-15

Page 81
Image 81
Q-Logic 6140 manual FI0154601-00 C