Q-Logic 6140 manual Information Tabbed Page Security Information

A

7 – SANsurfer iSCSI/FC Router Manager System Tree Window

„NTP Server 3 – Displays the IP address of the third NTP server to be queried by the router when setting its time and date. This server is used only if the first and second NTP servers did not respond. If your hardware supports IPv6, you may choose the appropriate IP protocol of the NTP server, either IPv4 or IPv6, then enter the IP address using the appropriate notation.

„NTP Server 4 – Displays the IP address of the fourth NTP server to be queried by the router when setting its time and date. This server is used only if the first, second, and third NTP servers did not respond. If your hardware supports IPv6, you may choose the appropriate IP protocol of the NTP server, either IPv4 or IPv6, then enter the IP address using the appropriate notation.

„Set NTP Address – After enabling NTP Servers and setting their IP addresses, click this button to save any changes made to the NTP server IP addresses.

Security Information

Select the fourth vertical tab on the router’s Information tabbed page to display the Security tabbed page.

Figure 7-16 Information Tabbed Page - Security Information

The Security Information tabbed page enables you to set the router’s password. The Security tabbed page provides the following parameters:

„Current Password – You must enter the current password before changing it.

„New Password – Enter the new router password.

„Verify New Password – Verify the password entered in the New Password field.

„Apply – Click this button to save the password changes.

„Clear Fields – Click this button to clear the Current Password, New Password, and Verify Password fields.

FI0154601-00 C 7-17