Q-Logic 6140 manual SANsurfer iSCSI/FC Router Manager Action Menu

A

7 – SANsurfer iSCSI/FC Router Manager Action Menu

„Disconnect – Disconnects from a SANbox 6140 router, removing it from the system tree.

„Reboot – Reboots the SANbox 6140 router.

„View Logs – Opens the view logs window.

„Presentation Wizard – Launches a wizard for presenting (mapping) LUNs to iSCSI initiators (see page 7-64).

„Presentation Unmap Wizard – Launches a wizard for unmapping LUNs from iSCSI initiators (see page 7-64).

„Ping – Initiates a ping from the specified port (management, GE1, or GE2) to a specified IP address.

„FW Update Wizard – Launches a wizard for updating the router’s firmware (see page 7-54).

„Add Initiator Wizard – Launches a wizard for entering an iSCSI initiator into the system database (see page 7-52).

„Remove Initiator – Removes the selected iSCSI initiator. This option is available only when an initiator is selected (highlighted) in the system tree.

„Remove Offline Target – Removes the selected offline Fibre Channel target. This option is available only when an offline FC target is selected (highlighted) in the system tree.

„Beacon ON – Turns on the SANbox 6140 router beacon to quickly locate the router.

„Beacon OFF – Turns off the SANbox 6140 router beacon.

FI0154601-00 C 7-7