Q-Logic 6140 manual Admin Command, Authority, Syntax, Keywords, Examples

A – Command Reference Commands

S

Admin Command

Opens and closes an administrator session. Any command that changes the router configuration requires that the user be in an Admin session. Only one Admin session can be open on the router at any time. An inactive Admin session will time out after a period of 15 minutes.

Authority	Admin session
Syntax	admin
	start (or begin)
	end (or stop)
	cancel
Keywords	start (or begin)
	Opens the Admin session.
	end (or stop)
	Closes the Admin session. The logout, shutdown, and reset commands also
	end an Admin session.
	cancel
	Terminates an Admin session opened by another user. Use this keyword with
	care, because it terminates the Admin session without warning the other user and
	without saving pending changes.
Notes	Closing a Telnet window during an Admin session does not release the session. In
	this case, you must either wait for the Admin session to time out, or use the Admin
	cancel command.
Examples	The following example shows how to open and close an Admin session:

QRouter #> admin start

Password : ******

QRouter(admin) #>

.

.

.

QRouter(admin) #> admin end QRouter #>

A-6 FI0154601-00 C