Q-Logic 6140 manual Set Chap Command, Configures general router parameters, Set chap

A

A – Command Reference Commands

Set CHAP Command

Configures general router parameters.

Authority	Admin session
Syntax	set chap
Examples	The following example shows the set chap command:
	QRouter (admin) #> set chap
	A list of attributes with formatting and current values will follow.
	Enter a new value or simply press the ENTER key to accept the current
	value. If you wish to terminate this process before reaching the end
	of the list press 'q' or 'Q' and the ENTER key to do so.

Index iSCSI Name

---------------

0iqn.2004-08.com.qlogic:isr-6140:test.0

1iqn.2004-08.com.qlogic:isr-6140:test.1

2iqn.1991-05.com.microsoft:qlogic-09sd5i4l

3 iqn.2004-08.com.qlogic:isr-6140:test.0.20000014c3449afa.22000014c3449 afa

Please select a presented target from the list above ('q' to quit): 2

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

CHAP	(0=Enable, 1=Disable)	[Disabled]		0
CHAP	Secret (Max = 100 characters)	[	]	****

All attribute values for that have been changed will now be saved.

FI0154601-00 C A-27