Q-Logic 6140 manual Set NTP Command, Configures the NTP parameters, Set ntp

A – Command Reference Commands

S

Set NTP Command

	Configures the NTP parameters.
Authority	Admin session
Syntax	set ntp
Examples	The following example shows the set ntp command:
	QRouter (admin) #> set ntp
	A list of attributes with formatting and current	values will follow.
	Enter a new value or simply press the ENTER key to accept the current
	value. If you wish to terminate this process before reaching the end
	of the list press 'q' or 'Q' and the ENTER key to do so.
	NTP (0=Enable, 1=Disable)	[Enabled	]
	TimeZone Offset from GMT (Min=-12hrs,Max=12hrs)	[-8	]
	IP Address [0]	[0.0.0.0	]
	207.126.97.57
	IP Address [1]	[0.0.0.0	]
	IP Address [2]	[0.0.0.0	]
	All attribute values that have been changed will	now be saved.

A-34 FI0154601-00 C