Luninfo, Luns, Presentedtargets fc or iscsi | Q-Logic 6140 specification

A – Command Reference Commands

S

luninfo

Displays complete LUN information for a specified target and LUN.

luns

Displays LUN information and their targets.

lunmask

Displays LUN mappings.

mgmt

Displays the router’s management port (10/100) configuration.

ntp

Displays the router’s network time protocol (NTP) configuration.

presented_targets [fc or iscsi]

Displays targets presented by the router: FC, iSCSI, or both.

snmp

Displays the router’s simple network management protocol (SNMP) properties and trap configurations.

stats

Displays the router statistics, both FC and iSCSI.

system

Displays router product information including serial number, software version, hardware version, configuration, and temperature.

targets [fc or iscsi]

Displays targets discovered by the router: FC, iSCSI, or both.

vlan [port_num]

Displays the router’s VLAN configuration.

A-40	FI0154601-00 C

Image 172

Q-Logic 6140 manual Luninfo, Luns, Presentedtargets fc or iscsi, Targets fc or iscsi, Vlan portnum

Contents

SANbox 6140 Intelligent Storage Router Document Revision History SANbox 6140 Intelligent Storage Router User’s Guide SANbox 6140 Intelligent Storage Router User’s Guide Page Table of Contents Planning Removal/Replacement FI0154601-00 C Command Reference Configuring Chap Simple Network Management Protocol Snmp FI0154601-00 C List of Tables FI0154601-00 C Intended Audience Related Materials Safety Communications Statements Federal Communications Commission FCC Class a Statement CE Statement Laser Safety Information Vcci Class a Statement Accessible Parts Electrostatic Discharge Sensitivity Esds PrecautionsGeneral Public License Preamble FI0154601-00 C FI0154601-00 C FI0154601-00 C No Warranty END of Terms and Conditions How to Apply These Terms to Your New Programs Ty Coon, President of Vice Availability Technical SupportTraining Contact Information General Description Input Power LED Green System Fault LED AmberSystem Fault LED Blink Patterns Chassis LEDs Reset a Router Maintenance ButtonChassis Controls Reset and Select Boot Image Reset IP AddressEnable Dhcp Restore Factory Defaults Power OFF Power on Before firmware InitializationFibre Channel Ports Fibre Channel Port LEDs Fibre Channel Transceivers Gigabit Ethernet Port LEDs Ethernet Port-Management Serial Port Serial Port Pin Identification Planning Devices Device Access FC PerformanceFibre Channel ISCSI Related performance characteristics include the following ISCSI PerformanceBandwidth Latency T1 / DS-1 1.554 Mbits/Sec Performance TuningT3 / DS-3 45 Mbits/Sec Mbits/Sec OC-1 50 Mbits/Sec OC-3 150 Mbits/Sec Management Multiple RoutersOC-12 and Above 621 Mbits/Sec Recovery Services Security FI0154601-00 C Management Workstation Site RequirementsManagement Workstation Requirements Power Requirements Environmental Conditions Installing the SANbox 6140 Router SANbox 6140 Router and Accessories Pre-installation Check List Install the TransceiversPre-installation Checklist Mount the Router Configure the Management Workstation Connect the Management Workstation to the Router Setting the Workstation IP Address Configuring the Workstation Serial Port Install SANsurfer iSCSI/FC Router Manager Windows InstallationConnect the router to the power see Select the Intelligent Storage Routers icon For Linux, enter the following command Linux InstallationStart SANsurfer iSCSI/FC Router Manager Connect the Router to AC Power Configure the Router Telnet 10.0.0.1 username guest password Cable Devices to the Router Firmware Installation Using SANsurfer iSCSI/FC Router Manager to Install FirmwareUsing the CLI to Install Firmware Enter your username and password. For example Enter reboot. The following message displays Type y to reboot the systemAt the ftp prompt, type bin to set binary mode. For example Following message displays Chassis Diagnostics This section describes the following conditions Input Power LED is Off Power-On Self-Test DiagnosticsSystem Fault LED is On System Error Blink Pattern LED Blink PatternsHeartbeat Blink Pattern OK Operational Over-Temperature Blink Pattern Management Port IP Address Conflict Blink Pattern Recovering a Router FI0154601-00 C Removal/Replacement SFP Transceiver Removal and Replacement Replacement Router Removal and ReplacementRemoval SANsurfer iSCSI/FC Router Manager Introduction Menu Bar SANsurfer Router Manager Main Window Sections File Menu Settings MenuView Menu Wizards Menu 7shows the Wizards drop-down menu Help Menu 8shows the Help drop-down menu Tool Bar Action Menu SANsurfer iSCSI/FC Router Manager Action Menu System Tree Window 11shows the system tree Status Icons and Text 12 Component Information FC and iSCSI Ports RouterDiscovered iSCSI Initiators FC Discovered Targets ISCSI Presented TargetsFC discovered target icons LUN icons SANbox 6140 Router Information Basic Information Connectivity Management Information 14 Information Tabbed Page Management Information FI0154601-00 C NTP Server Information 15 Information Tabbed Page NTP Server Information Security Information 16 Information Tabbed Page Security Information Snmp Management Snmp ConfigurationSnmp Management tabbed page provides the following options Snmp Settings Snmp Trap Receivers FC Ports „ Link Status Port status, either Link Up or Link Down Advanced Configuration 19 FC Port Advanced Configuration Tabbed Save FC Port Settings Complete Click OK to close the message box Statistics 20 FC Port Statistics ISCSI Ports ISCSI port display consists of three tabs „ Information ISCSI Port Information ISCSI Port Network Settings„ Actual FI0154601-00 C Enable iSNS 22 Enable iSNS Server with IPv4 Address 24 Advanced Configuration Tabbed Advanced iSCSI Port Parameters FI0154601-00 C Discovered iSCSI Initiators 25 Discovered iSCSI Initiator Tabbed Pages Initiator Information Chap Settings LUN List 26 LUN List Tabbed FC Discovered Targets 27 FC Discovered Targets Information Tabbed 28 LUN List Tabbed ISCSI Presented Target List Tabbed 29 iSCSI Presented Target List Tabbed Discovered LUN Information Tabbed 30shows the Discovered LUN Information tabbed FI0154601-00 C LUN Presentation Information 1 and 2 Tabbed Pages 31shows the LUN Presentation Information 1 tabbed ISCSI Presented Targets 32 iSCSI Presented Targets Tabbed Pages Information Tabbed LUN Presentation Information Tabbed 33 LUN Presentation Information Tabbed Discovered LUN Information 34 Discovered LUN Information Tabbed Wizards 35 Wizards Menu Configuration Wizard 36 iSCSI Port Selection Dialog Box „ IP Address „ Subnet Mask „ Gateway Click Next 38 iSCSI Port IPv6 Settings Panel ISCSI Port IPv6 Settings Panel appears, as shown in Figure 39 Confirm Changes Dialog Box Confirm Changes dialog box displays, as shown in Figure Enter the password, then click OK Wizard displays a Warning message, as shown in Figure 42 iSCSI Port Configuration Status System displays the Finish dialog box, as shown in Figure Read the information, then click Finish Add Initiator Wizard 44 Create an Initiator Dialog Box 45 Security Check Dialog Box Security Check dialog box displays, as shown in Figure FW Update Wizard 47 Router Selection Dialog Box 48 Firmware File Selection Dialog Box 49 Confirm Changes Dialog Box 51 Firmware Update Status Dialog Box-Progress Presentation Wizard 53 Device Selection Dialog Box 54 LUN Mapping Dialog Box LUN Mapping dialog box displays, as shown in Figure 55 Confirm Changes Dialog Box 57 LUN Masking Configuration Status Dialog Box Finish dialog box displays, as shown in Figure 59 Finish Dialog Box Click Finish to complete the Presentation wizard Presentation Unmap Wizard 60 Device Selection Dialog Box 61 Select the Initiator for the LUN Presentation Dialog Box Confirm the LUN mapping changes by clicking Next 63 Security Check Dialog Box Click Finish to close the wizard Command Reference Logging on to a SAN Router Working with SAN Router Configurations Modifying a ConfigurationSaving and Restoring Router Configurations „ LUN Mapping, which uses the following command Save Router Configuration and Persistence Restore Router Configuration and Persistence Commands CLI command syntax is as followsCommand Table A-1. Command Line Completion Admin Command AuthoritySyntax Keywords Beacon Beacon CommandOff Clear Command Clear logs or statsLogs Stats Date Command Syntax dateMMDDhhmmCCYY Keywords MMDDhhmmCCYY FRU Command Keywords restoreRestore save Syntax fru Help Command Displays a list of the commands and their syntaxExamples The following example shows the help command Authority None Syntax help Luns Lunmask Memory Mgmt Ntp Presentedtargets snmp Displays a numbered list of the previously entered commands Examples The following example shows the history commandHistory Authority None Syntax history Image Command CleanupImage Unpack file Initiator Command InitiatorAdd Mod Please select an Initiator from the list above q to quit Examples The following example shows the logout command Logout CommandAuthority None Syntax logout Lunmask Command Lunmask Seagate Password Command Changes the guest and administrator passwordsExamples The following example shows the passwd command Syntax passwd Examples The following example shows the ping command Ping CommandSyntax ping Examples The following example shows the quit command Quit CommandAuthority None Syntax quit Reboot Command Syntax rebootRestarts the router firmware Authority Admin session Examples The following example shows the reboot command Reset Factory Command Save Command Traces Syntax set Set CommandKeywords chap Set Chap Command Configures general router parametersFollowing example shows the set chap command Set chap Set fc portnum Set FC CommandPortnum FI0154601-00 C Set iSCSI Command Configures an iSCSI portNumber of the iSCSI port to be configured Following example shows the set iscsi command FI0154601-00 C Set iSNS Command Configures iSNS parameters for an iSCSI portNumber of the iSCSI port to be configured for iSNS Following example shows the set isns command Set Mgmt Command Configures the router’s management port 10/100Following example shows the set mgmt command Set mgmt Set NTP Command Configures the NTP parametersFollowing example shows the set ntp command Set ntp Set Snmp Command Specifies the setting of the trap destinationsSet snmp Trapdestinations That have been changed Will now be saved Set System Command Configures the general router parametersFollowing example shows the set system command Set system Set Vlan Command Configures the router’s Vlan parametersFollowing example shows the set vlan command Set vlan Show Command Authority None Syntax show chapInitiators fc or iscsi Initiatorslunmask Luninfo LunsPresentedtargets fc or iscsi Targets fc or iscsi Show Chap Command Displays Chap configuration for iSCSI nodesExamples The following example shows the show fc command Authority None Syntax Show FC Command NoneShow fc portnum Identifies the number of the FC port to display Show Initiators Command Keywords fcSyntax show initiators fc Specifies the display of Fibre Channel initiators Authority None Show Initiators LUN Mask CommandSyntax show initiatorslunmask Show iscsi portnum Show iSCSI CommandNumber of the iSCSI port to be displayed IPv6 Link Local Following example shows the show isns command Show iSNS CommandShow isns portnum Show Logs Command Examples The following example shows the show logs commandDisplays the router event log Show logs Show Luninfo Command Show luninfo Show LUNs Command Examples The following example shows the show luns commandDisplays LUN information for each target Show luns Show Lunmask Command Syntax show lunmask Following example shows the show mgmt command Show Mgmt CommandShow mgmt Show NTP Command Show ntp Syntax show presentedtargets fc Show Presented Targets CommandSpecifies the display of FC presented targets 10.3.5.66 Show Snmp Command Show snmp Displays the router statistics FC and iSCSI Show Stats CommandShow stats 60362392962831 55036896842234 IP Fragment Rcvd Out of Order Show System Command Show system Show Targets Command Show targetsScsi Specifies the display of FC targets Following example shows the show targets iscsi command Syntax show vlan portnum Show Vlan CommandKeywords portnum Target Command Following example shows the target add commandTarget Not supported Following example shows the targetmap add command TargetMap CommandTargetmap Following example shows the targetmap rm remove command Traceroute Command Syntax traceroute Configuring Chap CLI-Discovery Session-Bi-directional Chap Click Advanced Select Chap Login Information Select Mutual AuthenticationCLI-Discovery Session-Uni-directional Chap Click Discovery CLI-Normal Session-Bi-directional Chap Click OK Click OK. The initiator completes the normal loginUse Set Chap CLI-Normal Session-Uni-directional Chap Click Advanced Configuration Select Enable ChapGUI-Discovery Session-Bi-directional Chap GUI-Discovery Session-Uni-directional Chap Type the IQN name stringClick Add Enter the address of the iSCSI port of the bridge Click OK Click OK. The initiator completes discovery Click Advanced Click Chap Login Information Click Information Select Enable ChapGUI-Normal Session-Bi-directional Chap Click Advanced Click OK Click OK. The initiator completes normal login GUI-Normal Session-Uni-directional Chap FI0154601-00 C Application Modules Table C-1. Application Modules-Informational Log Messages ISCSI Driver Table C-2. Scsi Driver-Informational Log Messages Fibre Channel Driver Table C-3. Fibre Channel Driver-Informational Log Messages Error Log Messages Table C-4. Application Module-Error Log Messages Capacity Table C-4. Application Module-Error Log Messages FI0154601-00 C FI0154601-00 C Table C-5. iSCSI. Driver-Error Log Messages Table C-6. Fibre Channel Driver-Error Log Messages Log Messages Log Messages Error Log Messages Table C-7. User Modules-Error Log Messages User Modules Log Message Table C-8. System-Error Log Messages System Fatal Log Messages Table C-9. iSCSI Driver-Fatal Log Messages Table C-9. iSCSI Driver-Fatal Log Messages FC Driver Table C-10. Fibre Channel Driver-Fatal Log Messages Table C-10. Fibre Channel Driver-Fatal Log Messages Table C-11. System-Fatal Log Messages FI0154601-00 C Snmp Properties Table D-1. Snmp Properties Snmp Trap Configuration Table D-2. Snmp Trap Configuration Parameters System Information QsrSerialNumberQsrHwVersion QsrSwVersion Network Port Table QsrNwPortEntry QsrNwPortRole QsrNwPortIndexQsrNwPortAddressMode QsrIPAddressType Fibre Channel Port Table QsrFcPortEntry QsrFcPortRoleQsrFcPortIndex QsrFcPortNodeWwn Sensor Table QsrSensorEntry Sensor entry consists of the following sequence of objectsQsrSensorType QsrSensorIndex QsrSensorValue QsrUpperThresholdQsrLowerThreshold QsrSensorState Notification Objects QsrEventSeverityQsrEventDescription QsrEventTimeStamp Agent Start Up Notification Agent Shut Down NotificationNetwork Port Down Notification Fibre Channel Port Down Notification Sensor Notification Generic Notification FI0154601-00 C AC power CE statement Account, guest A-2 Index Index-2 FI0154601-00 C FI0154601-00 C Index-3 LUN FI0154601-00 C Index-5 Index-6 FI0154601-00 C TCP Index-8 FI0154601-00 C