Q-Logic 6140 manual Set System Command, Configures the general router parameters, Set system

A

A – Command Reference Commands

Set System Command

	Configures the general router parameters.
Authority	Admin session
Syntax	set system
Examples	The following example shows the set system command:
	QRouter (admin) #> set system
	A list of attributes with formatting and current values will			follow.
	Enter a new value or simply press the ENTER key to accept the current
	value. If you wish to terminate this process before reaching			the end
	of the list press 'q' or 'Q' and the ENTER key to do so.
	WARNING:
	If enabled by operator, the Symbolic Name can be embedded as			part of
	the Only valid iSCSI name characters will be accepted. Valid			colon,
	characters include alphabetical (a-z, A-Z), numerical (0-9),
	hyphen, and period.
	Changes to the Settings below will be effective after a reboot.
	System Symbolic Name	(Max = 64 characters)	[alpha1	]
	Embed Symbolic Name	(0=Enable,1=Disable)	[Disabled	]
	Target Presentation Mode (0=Auto, 1=Manual) [Auto			]
	Lun Mapping (0=Enable, 1=Disable)		[Enabled	]
	System Log Level (Min = 0, Max = 3)		[0	]

All attribute values that have been changed will now be saved.

FI0154601-00 C A-37