Q-Logic 6140 manual Wizards Menu

7 – SANsurfer iSCSI/FC Router Manager Wizards

S

„Device Port ID – Displays the target device’s port ID.

„Port: the FC port where the target device was discovered.

„Product Vendor – Displays the vendor name of the LUN as reported by the SCSI Inquiry command.

„Product ID – Displays the product ID of the LUN as reported by the SCSI Inquiry command.

„Product Revision – Displays the product revision of the LUN as reported by the SCSI Inquiry command.

„LUN – Displays the logical unit number.

„Size – Displays the capacity (in megabytes) of the LUN as reported by the SCSI Capacity command.

„World Wide Unique LUN Name – Displays the WWULN of the LUN as reported on page 83 of the SCSI Inquiry command.

Wizards

The Wizards menu provides options that start step-by-step programs. These wizards help you configure and manage the SANbox 6140 router (see Figure 7-35).

Figure 7-35 Wizards Menu

From the Wizards menu, you can start any of the following programs:

„Configuration Wizard – Use this wizard to configure the iSCSI ports. This wizard starts automatically when a connection is made to a system that has unconfigured iSCSI ports. For more information, see page 7-45.

„Add Initiator Wizard – Use this wizard to enter an iSCSI initiator into the system database. iSCSI initiators are normally discovered (the router captures their names and addresses) the first time they log in to the SANbox 6140 router. This wizard allows you to enter the initiator information before the log, which allows you to map the LUNs to the initiator before they first log in to the router. For more information, see page 7-52.

7-44 FI0154601-00 C